All sides of the GT1000 are comprised of aluminum material of 4~5mm thickness and have each been assembled by an engineer to provide a firm enclosure with noise and vibration preventions. Furthermore, the connection part for the HDD (Hard Disk Drive) is made of rubber rollers and dampers, which serve to capture the vibration and noise from escaping.

The GT1000 enclosure is designed to maintain optimum internal temperature at all times, incorporating two 92mm LED Front Intake Fans and a 120mm Rear Exhaust Fan for high volume airflow through the system at low fan RPM for high performance cooling with quiet operation, and accommodates even the hottest CPUs that generate over 130watts of heat.

The latest high-performance HDDs have high generation of heat due to high RPM. The two 92mm LED Front Intake Fans draw in cool air from the outside into the system. As HDD is the first component to be cooled by this cool air, the decrease in the product's life expectancy and the occurrence of data error caused by high heat are minimized.

The side panel is designed to be opened with a one-touch opening door method. Thus, the side panel can be opened without the use of any special tools, which makes it convenient for users who have frequent component changes.

Unlike typical cases that only incorporate a thin aluminum facade front cover, the entire GT1000 enclosure incorporates firm 4-5mm thick anodized pure aluminum panels that prevent system vibration, reinforce system cooling by dissipating internal heat, and provide the highest in aesthetic quality.

The three LED fans with altering brightness depending on the fan's RPM provide greater aesthetic quality.

A transparent window has been installed on the side panel to provide excellent aesthetics as well as to allow the user to be able to view the diverse components installed inside the system. Especially for the users who favor system tuning, various LEDs can be used inside the system to create a unique system according to the user's preference.

All connecting bolts and cardholder are plated or colored to provide an elegant image as well as to provide a semi-permanent corrosion prevention.

Product Description

ZALMAN Z-MACHINE GT1000 - tower - ATX

Form Factor

Tower

Dimensions (WxDxH)

22 cm x 48 cm x 45 cm

Weight

12.5 kg

Colour

Black

I/O Connectors

2 x USB , 1 x IEEE 1394 (FireWire) , 1 x headphones - output , 1 x microphone - input

Installed Fans Qty

3

Supported Mainboards

ATX, microATX

System Cabinet Features

Noise reduction, windowed side panel, screwless drive bays, made of aluminium, security key lock, front airhole

Power Device

No power supply

Specification Compliance

ATX

Detail

General

Form Factor

Tower

Max Mainboard Size

ATX

Supported Mainboards

ATX, microATX

Specification Compliance

ATX

Internal Bays Qty

12

Front Accessible Bays Qty

5

Width

22 cm

Depth

48 cm

Height

45 cm

Weight

12.5 kg

Colour

Black

Fans

Rear : 1 x 12 cm - ( 1 installed) , Front : 2 x 9.2 cm - ( 2 installed)

System Cabinet Features

Noise reduction, windowed side panel, screwless drive bays, made of aluminium, security key lock, front airhole

Expansion / Connectivity

Expansion Bays Total (Free)

4 ( 4 ) x front accessible - 5.25" , 1 ( 1 ) x front accessible - 3.5" , 6 ( 6 ) x internal - 3.5"

Expansion Slots Total (Free)

7 Expansion Slot

Interfaces

2 x USB - 4 PIN USB Type A , 1 x IEEE 1394 (FireWire) - 6 PIN FireWire , 1 x headphones - output - mini-phone stereo 3.5 mm , 1 x microphone - input - mini-phone 3.5mm

Miscellaneous

Included Accessories

Dual voltage fan power adapter

Power

Power Device

No power supply